张亚,陈钰金,徐春国,等.变温度场下楔横轧端头凹心数值模拟研究[J].精密成形工程,2015,7(5):99-104,129.
ZHANG Ya,CHEN Yu-jin,XU Chun-guo,et al.Numerical Simulation Study on Cross Wedge Rolling End Concavity under Non-uniform Temperature Field[J].Journal of Netshape Forming Engineering,2015,7(5):99-104,129. |
| 变温度场下楔横轧端头凹心数值模拟研究 |
| Numerical Simulation Study on Cross Wedge Rolling End Concavity under Non-uniform Temperature Field |
| 投稿时间：2015-07-20 修订日期：2015-09-10 |
| DOI：10.3969/j.issn.1674-6457.2015.05.016 |
| 中文关键词: 楔横轧 变温度场 凹心 数值模拟 |
| 英文关键词: cross wedge rolling non-uniform temperature field concavity numerical simulation |
| 基金项目: |
|
| 摘要点击次数: 4241 |
| 全文下载次数: 3331 |
| 中文摘要: |
| 目的 研究楔横轧凹心产生的原因以及变温度场对端面凹心的影响。 方法 采用数值模拟的方法,详细分析了楔横轧变形规律下凹心产生的原因。 同时利用 Deform-3D 用户子程序方式,给轧件端部添加一定形式的变温度场,分析了变温度场改善凹心缺陷的机制;研究了变温区表面温度与变温度场长度对凹心深度的影响。 结果 楔横轧凹心是由轧至极限料头长度 Imin时,端面金属变形不均匀引起的,凹心深度随着变温长度的增加和变温区表面温度的减小而减小,结论 所提变温度场楔横轧轧制工艺,可以有效改善端面变形的均匀性,添加此变温度场可以有效减小楔横轧凹心深度。 |
| 英文摘要: |
| The aim of this work was to study the generation mechanism of cross wedge rolling ( CWR) end concavity and the influence of non-uniform temperature filed on the end concavity. The generation mechanism of end concavity under the deformation rule of cross wedge rolling was detailed analyzed with numerical simulation. Meanwhile, by adding a certain form of non-uniform temperature field on the billet end through Deform-3D software user-routine method, the mechanism that the non-uniform temperature field decreases the depth of the end concavity was analyzed. The influences of the billet surface temperature and the length of the non-uniform temperature area on the depth of end concavity were studied. The results showed that the end concavity was caused by the uneven metal deformation in the end face when the CWR mod- ule rolled to the critical end length Imin. The depth of the end concavity decreased with the increase of the length of the nonuniform temperature area and the decrease of the billet surface temperature. The CWR process under non-uniform temperature field mentioned in this paper could effectively improve the uniformity of the deformation of billet end. Therefore, the CWR's end concavity could be effectively decreased through adding non-uniform temperature field. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501719号