党晖,周密,龚甘霖,等.飞机蒙皮多道次滚弯加载轨迹设计方法研究[J].精密成形工程,2015,7(1):66-71,77.
DANG Hui,ZHOU Mi,GONG Gan-lin,et al.The Loading Path Design Method of Multi-Passes Roll Forming for Aircraft Skin[J].Journal of Netshape Forming Engineering,2015,7(1):66-71,77. |
| 飞机蒙皮多道次滚弯加载轨迹设计方法研究 |
| The Loading Path Design Method of Multi-Passes Roll Forming for Aircraft Skin |
| 投稿时间：2014-10-10 修订日期：2015-01-10 |
| DOI：10.3969/j.issn.1674-6457.2015.01.013 |
| 中文关键词: 滚弯成形 加载轨迹 飞机蒙皮 |
| 英文关键词: roll forming loading path aircraft skin |
| 基金项目:洪都公司基础科研项目(司科190-111) |
|
| 摘要点击次数: 4441 |
| 全文下载次数: 3916 |
| 中文摘要: |
| 目的 研究针对数控滚弯机的飞机蒙皮多道次滚弯加载轨迹设计方法。方法 根据数控滚弯机机构的特点,提取零件截面线,根据截面线曲率进行分段和参数化方法设计加载轨迹,通过反向求解将加载轨迹转换为设备运动参数。结果 飞机蒙皮多道次滚弯加载轨迹设计方法有效地提高了工艺参数设计的效率和准确度,并与数控设备相结合,输出了设备的控制参数。结论 相比传统的以经验分析和通过反复试弯大致确定工艺程序及参数,并通过人工控制的飞机蒙皮滚弯成形方法具有突出的实质性特点和显著的进步。 |
| 英文摘要: |
| To study the design method of multi-passes roll forming on CNC rolling press for aircraft skin. Methods Based on the mechanical feature of CNC roll bending machine, the loading path was designed through extraction of part section lines. Segmentation was conducted based on the curvatures of the section lines, and parameterization method was used to design the loading path. And then inverse mechanical calculation was adopted for transforming the loading path to device movement parameters. Results The loading path design method of multi-passes roll forming effectively promoted the efficiency and accuracy of process parameter design and exported the control parameters of the device when combined with the CNC rolling press. Conclusion The loading path design method had the advantages of the substantive feature and the significant progress when compared with the traditional manual control method of roll forming for aircraft skin based on empirical analysis and repeated trial test for rough determination of process parameters. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501719号