王涛,甘贵生,胡志兰,等.纳米Ni 颗粒对焊锡膏的界面IMC 影响[J].精密成形工程,2014,6(6):122-126. WANG Tao,GAN Gui-sheng,HU Zhi-lan,et al.Influence of Ni Nanoparticle on the Interfacial Intermetallic Compounds of Solder Paste[J].Journal of Netshape Forming Engineering,2014,6(6):122-126. |
纳米Ni 颗粒对焊锡膏的界面IMC 影响 |
Influence of Ni Nanoparticle on the Interfacial Intermetallic Compounds of Solder Paste |
投稿时间:2014-06-10 修订日期:2014-11-10 |
DOI:10.3969/j.issn.1674-6457.2014.06.020 |
中文关键词: 纳米Ni 焊锡膏 IMC |
英文关键词: Ni nanoparticles solders paste IMC |
基金项目: |
|
摘要点击次数: 4797 |
全文下载次数: 4488 |
中文摘要: |
目的 研究纳米Ni 对SnAg0. 3Cu0. 7 无铅焊锡膏的焊点界面IMC 影响。方法 采用在助焊剂中添加纳米Ni 颗粒,制备出纳米Ni 颗粒增强的SnAg0. 3Cu0. 7 焊锡膏,分析纳米Ni 在150 ℃时效中对IMC 的影响。结果 在150 ℃时效中界面IMC 的厚度随着时效时间延长而增大,形貌变成平缓层状;添加Ni 质量分数为0. 025%时,对界面IMC 几乎无影响,当添加质量分数为0. 05%和0. 1%的纳米Ni 能促进IMC 的生长,但抑制Cu3Sn 层的生长。结论 通过添加纳米Ni 颗粒,在150 ℃时效中可促进IMC 的生长,抑制Cu3Sn 层的生长。 |
英文摘要: |
Objective To investigate the effects of Ni nanoparticles addition on the interfacial intermetallic compounds of SnAg0. 3Cu0. 7 lead-free solder paste. Methods The nanoparticle reinforced SnAg0. 3Cu0. 7 paste was prepared by adding Ni nanoparticles in the flux. The influence of Ni nanoparticles on IMC aging at 150 ℃was analyzed. Results The study of interface IMC showed that during aging at 150 ℃, the thickness of interface IMC increased with prolonged aging time and the morphology was changed into a planar type structure. The morphology of IMC was basically unchanged when the mass fraction of Ni nanoparticles was 0. 025%. Moreover, the growth of IMC was enhanced while that of Cu3 Sn was suppressed when the mass fractions of Ni nanoparticles were 0. 05% and 0. 1%, respectively. Conclusion The growth of IMC was enhanced by adding Ni nanoparticles in the aging at 150 ℃, while the growth of Cu3 Sn layer was suppressed. |
查看全文
查看/发表评论 下载PDF阅读器 |
关闭 |
|
|
|