初冠南,张彩英,鲁国春.初始缺陷对耐压结构承载性能影响[J].精密成形工程,2014,6(5):80-84.
CHU Guan-nan,ZHANG Cai-ying,LU Guo-chun.Influence of Initial Imperfections on the Bearing Capacity of Pressure-resistant Structure[J].Journal of Netshape Forming Engineering,2014,6(5):80-84. |
| 初始缺陷对耐压结构承载性能影响 |
| Influence of Initial Imperfections on the Bearing Capacity of Pressure-resistant Structure |
| 投稿时间：2014-07-10 修订日期：2014-09-01 |
| DOI：10. 3969 /j. issn. 1674-6457. 2014. 05. 014 |
| 中文关键词: 初始缺陷 承载性能 耐压结构 厚壁筒 |
| 英文关键词: initial imperfection bearing capacity pressure-resistant structure thick-wall cylinder |
| 基金项目: |
|
| 摘要点击次数: 5399 |
| 全文下载次数: 4449 |
| 中文摘要: |
| 目 的 基于有限元方法, 通过分析研究深海耐压圆 筒结构在不同 初始缺陷下的屈曲压力, 研究初始缺陷对厚壁圆筒承载极限的影响。 方法 建立了 三维厚壁筒模型, 分别 研究了 圆 筒在初始几何缺陷、初始应力缺陷和两种缺陷复合的状态下, 结构的承载性能, 并将得到的结果与 理想状态下的结构作对比。 结论 结果表明,无论是初始几何缺陷,还是初始应力缺陷,都会降低结构的承载极限。 |
| 英文摘要: |
| Objective Based on the finite element method, the buckling pressure of deep-sea pressure-resistant cylinder structure was analyzed under different initial imperfections and the influence of initial imperfections on the bearing limit of the thick-wall cylinder was studied in this article. Methods The three-dimensional model of thick-wall cylinder was established, the bearing capacity of the cylinder structure was respectively studied under the initial imperfections, including initial geometric imperfection and initial imperfection of residual stress and the superposition of the two imperfections structure. The results were compared with the analysis results of the ideal situation. Conclusion It turned out that the initial defects reduced the structure bearing limit, regardless of initial geometric imperfection or initial stress imperfection. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501719号