袁秋,邓明,宁国松,等.剪挤复合精整中凸模圆角对核心变形区应力状态的影响[J].精密成形工程,2014,6(3):45-49.
YUAN Qiu,DENG Ming,NING Guo-song,et al.Effects of the Punch-nose Radii on the Stress State of Core Deformation Zone in Shearing-extruding Trimming Technology[J].Journal of Netshape Forming Engineering,2014,6(3):45-49. |
| 剪挤复合精整中凸模圆角对核心变形区应力状态的影响 |
| Effects of the Punch-nose Radii on the Stress State of Core Deformation Zone in Shearing-extruding Trimming Technology |
| 投稿时间：2014-03-03 修订日期：2014-05-01 |
| DOI：10.3969/j.issn.1674-6457.2014.03.010 |
| 中文关键词: 剪挤复合精整 核心变形区 凸模圆角 压应力 |
| 英文关键词: shearing-extruding trimming core deformation zone punch-nose radii compressive stress |
| 基金项目:重庆市科委项目( cstc2012gg-yyjs60009,cstc2013yykfc60004) |
|
| 摘要点击次数: 5315 |
| 全文下载次数: 4260 |
| 中文摘要: |
| 目的 为了提高剪挤复合精整加工零件的成形质量,研究了关键工艺参数对核心变形区应力状态的影响。 方法 利用理论分析的方法,确定了凸模圆角是影响核心变形区应力状态的关键工艺参数;进一步利用有限元模拟和物理实验相结合的方法,研究了不同凸模圆角半径对核心变形区应力状态的影响。 结果 在一定范围内,模具圆角越大,所提供的压应力也就越大。 结论 压应力可以抑制撕裂产生,从而降低成形面损伤,所以一定范围内增大模具圆角可以提高成形质量。 |
| 英文摘要: |
| Objective To study the effects of key process parameters on the stress state of core deformation zone in shearing-extruding trimming technology,so as to improve the quality of the parts. Methods The effects of punch-nose radii on the stress state of core deformation zone were studied through theoretical analysis, numerical simulation as well as physical experiment. Results The results indicated that the punch-nose angle provided lateral and vertical extrusion to materials of core deformation zone and placed it in a state of compression. Conclusion The compressive stress could prevent tear, reduce the forming surface damage and improve the forming quality. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501719号