文章摘要
李凌风,巩子天纵,李萍.纯铝粉末等径角挤压固结模拟及实验研究[J].精密成形工程,,():.
LI Ling-feng,GONG Zi-tian-zong,LI Ping.Consolidation Simulation and Experimental Research of Pure Aluminum Powder Materials during Equal Channel Angular Pressing[J].Journal of Netshape Forming Engineering,,():.
纯铝粉末等径角挤压固结模拟及实验研究
Consolidation Simulation and Experimental Research of Pure Aluminum Powder Materials during Equal Channel Angular Pressing
  
DOI:
中文关键词: 纯铝粉末  等径角挤压  固结成形
英文关键词: pure aluminum powder  equal channel angular pressing  consolidation forming
基金项目:霍英东教育基金会资助项目“背压等径角挤扭钼粉固结成形工艺及机理研究”(121053)
作者单位
李凌风 合肥工业大学 材料科学与工程学院合肥 230009 
巩子天纵 合肥工业大学 材料科学与工程学院合肥 230009 
李萍 合肥工业大学 材料科学与工程学院合肥 230009 
摘要点击次数: 6183
全文下载次数: 0
中文摘要:
      目的 研究纯铝粉末在ECAP工艺下的固结行为。方法 采用Deform软件对铝粉的ECAP工艺进行热力耦合有限元模拟分析,研究粉末致密情况、静水压力情况以及温度场分布情况等,剖析铝粉的固结行为。通过铝粉的ECAP实验对粉末的固结质量进行综合评定。结果 有限元模拟表明,ECAP剪切转角处静水压力最大,温度最高,相对密度接近0.97,近乎完全致密材料,为粉末固结提供了必要前提。实验结果表明,在200 ℃条件下,可以通过ECAP工艺将铝粉固结成为块体材料。结论 ECAP变形过程能够在较低的温度条件下实现粉末的固结行为。
英文摘要:
      Objective To study pure aluminum powder consolidation behavior under ECAP process. Methods The software Deform was used for thermodynamic coupling finite element simulation analysis of the aluminum powder ECAP process. The density, force and temperature distribution of the powder were studied to analyze the consolidation behavior of aluminum powder. The quality of powder consolidation was evaluated through the ECAP experiment of aluminum powder. Results Based on the compressible continuous medium theories, thermodynamic coupling finite element simulation of the aluminum powder ECAP process showed that the hydrostatic pressure of the sample reached the maximum when it passed through the intersection part. There was a significant effect of shear heating at the intersection part, resulting in the peak temperature. The relative density could reach 0.97, and the almost fully dense material provided favorable conditions for powder consolidation. Experimental results showed that pure aluminum powder could be successfully consolidated into fully dense bulk material at 200℃ using ECAP. Conclusion The ECAP deformation process was conducive to consolidate the powder under the condition of low temperature.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

You are the13996817visitor    渝ICP备15012534号-6

>Copyright:《精密成形工程》编辑部 2014 All Rights Reserved

>Postal Code:400039 Phone:023-68679125Fax:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号