王连义,姜春茂,李守敬,等.石油钻杆接头模锻工艺研究[J].精密成形工程,2013,5(5):41-43.
WANG Lian-yi,JIANG Chun-mao,LI Shou-jing,et al.Die Forging Technology Research of Oil Drill Pipe Joint[J].Journal of Netshape Forming Engineering,2013,5(5):41-43. |
| 石油钻杆接头模锻工艺研究 |
| Die Forging Technology Research of Oil Drill Pipe Joint |
| 投稿时间：2013-04-07 修订日期：2013-08-01 |
| DOI：10.3969/j.issn.1674-6457.2013.05.010 |
| 中文关键词: 钻杆接头 模锻工艺 模具设计 材料利用率 |
| 英文关键词: oil drill pipe joint die forging technology mold design material utilization |
| 基金项目: |
|
| 摘要点击次数: 5020 |
| 全文下载次数: 4367 |
| 中文摘要: |
| 介绍了石油钻杆接头采用自由锻造的工艺方式存在毛坯余量大、材料利用率低、生产成本较高等缺点。 为了提高钻杆接头毛坯精化程度和降低生产成本,提高市场竞争力,需要更高效的加工方式。 通过对钻杆接头模锻工艺参数摸索,合理地选择了钢坯感应加热、毛坯加工率、加工设备选择、模具设计、锻后缓冷等工序工艺参数,最终实现了钻杆接头一次模锻成形的工艺。 石油钻杆接头模锻后,降低了毛坯的下料质量,减少了机械加工余量,提高了材料利用率,降低了生产成本。 |
| 英文摘要: |
| This paper introduces free forging process of oil drill pipe joint with big blank allowance, low utilization of materials, high production cost. In order to improve precision forming of oil drill pipe joint and reduce production cost, improve market competitiveness, more efficient processing method is needed. Through the research of joint die forging process parameters, reasonable choice of process parameters such as billet induction heating, deformation extent of the billet, processing equipment selection, mold design and slow cooling after forging, die forging process of pipe joint is realized finally. Oil drill pipe joint forging reduces blank weight and machining allowance, and improves material utilization, reduces production cost. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501719号