张金鹏,陈文琳,周煜辰,等.多台阶深筒形件成形工艺设计及仿真[J].精密成形工程,2013,5(4):31-34.
ZHANG Jin-peng,CHEN Wen-lin,ZHOU Yu-chen,et al.The Forming Process Designing and Simulation of Multi-step Deep Cylindrical Part[J].Journal of Netshape Forming Engineering,2013,5(4):31-34. |
| 多台阶深筒形件成形工艺设计及仿真 |
| The Forming Process Designing and Simulation of Multi-step Deep Cylindrical Part |
| 投稿时间：2013-02-09 修订日期：2013-06-01 |
| DOI：10.3969/j.issn.1674-6457.2013.04.008 |
| 中文关键词: 阶梯筒形件 拉深 工艺设计 仿真 |
| 英文关键词: stepped cylindrical part drawing process design simulation |
| 基金项目: |
|
| 摘要点击次数: 4953 |
| 全文下载次数: 4217 |
| 中文摘要: |
| 根据塑性成形理论分析、计算确定某电器产品的阶梯圆筒件成形工艺,并建立有限元模型,实现多道次拉深过程的仿真。 最后对仿真结果进行分析和试验验证。 |
| 英文摘要: |
| This paper calculates and determines the forming process of the stepped cylindrical piece of an electrical product based on the theoretical analysis of plastic forming. Then this paper implements the simulation of deep drawing process using the finite element model of multi-channel. Finally, it give the analysis with the results of simulation and experimental verification. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501719号