王连义,赵国伟,高勃石,等.30 CrMnSiA 钢薄壁变截面壳体旋压成形[J].精密成形工程,2013,5(3):86-88.
WANG Lian-yi,ZHAO Guo-wei,GAO Bo-shi,et al.Spinning Process Research of 30 CrMnSiA Steel Shell with Thin-walled Variable Cross-section[J].Journal of Netshape Forming Engineering,2013,5(3):86-88. |
| 30 CrMnSiA 钢薄壁变截面壳体旋压成形 |
| Spinning Process Research of 30 CrMnSiA Steel Shell with Thin-walled Variable Cross-section |
| 投稿时间：2012-09-10 修订日期：2013-04-01 |
| DOI：10.3969/j.issn.1674-6457.2013.03.020 |
| 中文关键词: 薄壁 旋压 工艺研究 |
| 英文关键词: thin-walled spinning technology research |
| 基金项目: |
|
| 摘要点击次数: 6028 |
| 全文下载次数: 4907 |
| 中文摘要: |
| 着重分析了某产品薄壁变截面壳体旋压加工的工艺性,经过对旋压工艺参数的摸索和验证试验,成功完成了旋压工艺研究,验证了旋压加工的工艺可行性,使旋压成形件满足了产品各项要求,并通过数据表明采用旋压方式加工该产品降低了生产成本,提高了经济效益。 |
| 英文摘要: |
| This paper focuses on the processing property of a thin-walled variable cross-section shell spinning. After the spinning process parameters research and the verification test the spinning process research is successfully completed and the process feasibility of spinning processing to meet the product requirements is verified. Through the data it shows that the spinning technology for processing the product reduces production costs, improves economic efficiency. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501719号