张袁,陈文琳,喻建军,等.铝合金板料冲压成形的模拟分析[J].精密成形工程,2013,5(3):44-47.
ZHANG Yuan,CHEN Wen-lin,YU Jian-jun,et al.Simulation Analysis of Stamping Process of Aluminum Alloy Plate[J].Journal of Netshape Forming Engineering,2013,5(3):44-47. |
| 铝合金板料冲压成形的模拟分析 |
| Simulation Analysis of Stamping Process of Aluminum Alloy Plate |
| 投稿时间：2012-09-10 修订日期：2013-04-01 |
| DOI：10.3969/j.issn.1674-6457.2013.03.010 |
| 中文关键词: 铝合金板 低碳钢板 后围下延伸板 冲压成形 数值模拟 |
| 英文关键词: aluminum alloy plate low-carbon steel plate lower back extend panel stamping process numerical simulation |
| 基金项目:安徽省教育厅自然科学研究项目( KJ2009B045) ;合肥工业大学铜陵研究院资助(2011QTXM1447) |
|
| 摘要点击次数: 4955 |
| 全文下载次数: 4559 |
| 中文摘要: |
| 以某客车后围下延伸板为研究对象,运用仿真软件分别对铝合金板和低碳钢板进行冲压成形模拟分析,得到在工艺条件相同的情况下这 2 种材料成形性的差异,以及获得铝合金成形合格产品的工艺条件。 |
| 英文摘要: |
| Lower back extend panel is the research object in this paper. The stamping processes of aluminum alloy plate and lowcarbon steel plate were analyzed by using simulation software in order to obtain the forming difference of aluminum alloy plate and lowcarbon steel plate under the same process conditions. Furthermore the condition of aluminum forming process was got when a qualified product appeared. Finally, this conclusion can be used as reference for aluminum alloy plate replacing low-carbon steel plate in the actual production of stamping process. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号