贺玉民,李晨,石海城,等.变壁厚薄壁筒形件旋压工艺设计和试验研究[J].精密成形工程,2013,5(3):40-43,64.
HE Yu-min,LI Chen,SHI Hai-cheng,et al.Spinning Process Design and Experiment Study on Thin-walled Cylindrical Parts with Variable Wall Thickness[J].Journal of Netshape Forming Engineering,2013,5(3):40-43,64. |
| 变壁厚薄壁筒形件旋压工艺设计和试验研究 |
| Spinning Process Design and Experiment Study on Thin-walled Cylindrical Parts with Variable Wall Thickness |
| 投稿时间：2012-11-12 修订日期：2013-04-01 |
| DOI：10.3969/j.issn.1674-6457.2013.03.009 |
| 中文关键词: 旋压 加工工艺 工艺参数 |
| 英文关键词: spinning manufacturing process process parameter |
| 基金项目: |
|
| 摘要点击次数: 4520 |
| 全文下载次数: 3966 |
| 中文摘要: |
| 选用合适的旋压设备,设计合理的工艺装备和旋压毛坯,通过实践加工验证,完善了变壁厚薄壁筒形件的旋压工艺参数( 道次压下量、进给比、旋压方式等) ,得出了既能保证产品力学性能,又能保证产品质量和精度的旋压加工工艺方案。 |
| 英文摘要: |
| By chosing suitable spinning equipment and designing reasonable tools and spinning blank the spinning process parameters( thickness reduction per pass, feed rate of rollers, spinning mode) of thin-walled cylindrical parts with variable wall thickness are improved through manufacturing test. The spinning process scheme is obtained by which mechanical property of the product can be ensured and the quality and precision can be ensured too. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501719号