阚盈,程明,姚明星,等.中厚板轧机支承辊中心疏松压实过程的有限元模拟研究[J].精密成形工程,2013,5(3):10-14,23.
KAN Ying,CHENG Ming,YAO Ming-xing,et al.Finite Element Analysis on Compaction of Center Porosity during Forging of Heavy and Medium Backup Roll[J].Journal of Netshape Forming Engineering,2013,5(3):10-14,23. |
| 中厚板轧机支承辊中心疏松压实过程的有限元模拟研究 |
| Finite Element Analysis on Compaction of Center Porosity during Forging of Heavy and Medium Backup Roll |
| 投稿时间：2012-09-10 修订日期：2013-04-01 |
| DOI：10.3969/j.issn.1674-6457.2013.03.003 |
| 中文关键词: 支承辊 多工步锻造 有限元模拟 疏松压实 |
| 英文关键词: backup roll multi-stage forging finite element simulation, compaction of porosity |
| 基金项目:国家科技重大专项资助项目(2009ZX04014-081) |
|
| 摘要点击次数: 4538 |
| 全文下载次数: 3725 |
| 中文摘要: |
| 基于 Gleeble 热模拟压缩实验和 Arrhenius 方程建立了 70 Cr3Mo 的本构模型,运用 Deform-3 D 软件对支承辊的多工步锻造过程进行了有限元模拟,得到了镦粗和拔长过程中压下量和中心疏松密度的关系,对比研究了平板镦粗和锥板镦粗对中心压实的影响。 |
| 英文摘要: |
| Based on the hot compression experiment and Arrhenius equation, the finite element model for multi-stage forging process of backup roll was established. The relationship between height reduction and relative density of center porosity was obtained from simulation results. Comparative simulations were carried out to study the effect of compaction of center porosity of flat anvil and conical anvil upset. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501719号