佘彩凤,鄂大辛,林芳.汽车用烘烤硬化板 BH340 及深冲板 St 15 成形性能分析[J].精密成形工程,2013,5(3):6-9,18.
SHE Cai-feng,E Da-xin,LIN Fang.Analysis on Forming Properties of Bake-hardening Sheet Steel BH340 and Deep-drawing Sheet Steel St 15 for Automobile[J].Journal of Netshape Forming Engineering,2013,5(3):6-9,18. |
| 汽车用烘烤硬化板 BH340 及深冲板 St 15 成形性能分析 |
| Analysis on Forming Properties of Bake-hardening Sheet Steel BH340 and Deep-drawing Sheet Steel St 15 for Automobile |
| 投稿时间：2013-03-20 修订日期：2013-04-01 |
| DOI：10.3969/j.issn.1674-6457.2013.03.002 |
| 中文关键词: 汽车用板 烘烤硬化 成形极限 |
| 英文关键词: automobile sheet steel bake hardening forming limit |
| 基金项目:国家自然科学基金(51175044) |
|
| 摘要点击次数: 4559 |
| 全文下载次数: 3709 |
| 中文摘要: |
| 进行了汽车用烘烤硬化钢板 BH340 及深冲钢板 St15 的力学性能、时效特性和烘烤硬化性能实验,并利用有限元方法模拟了 2 种钢板的成形极限和破裂点应变路径。 分析后指出, BH340 烘烤硬化效应较显著,时效效应不明显,对于汽车外覆盖件成形、涂漆烘烤工艺具有较好的适应性; St15 经形变强化后仍具有良好的塑性,适用于多道次成形工艺。 另外,2 种钢板均具有较为明显的面内异向性。 |
| 英文摘要: |
| Experiments are carried out to research the mechanical properties, aging characteristics and bake hardenability of bakehardening steel sheet BH340 and deep-drawing steel sheet St15 for automobile, and the forming limit and strain path in the fracture position of both sheets are simulated by finite element method. It was revealed that a remarkable bake-hardenability and invisible aging effect can be expected for BTH340 steel sheet,which makes it adaptable for automobile panel forming and paint baking process; while a good plasticity can be expected for St15 steel sheet after work-hardening,which makes it appropriate for multi-step forming process.Besides, both steel sheets display obvious anisotropy in plane. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501719号