刘珂,黄文超,袁世平,等.铝合金壳体件压铸工艺的数值模拟[J].精密成形工程,2013,5(1):25-28.
LIU Ke,HUANG Wen-chao,YUAN Shi-ping,et al.Numerical Simulation of Die Casting Technology on Shell Parts of Aluminium Alloy[J].Journal of Netshape Forming Engineering,2013,5(1):25-28. |
| 铝合金壳体件压铸工艺的数值模拟 |
| Numerical Simulation of Die Casting Technology on Shell Parts of Aluminium Alloy |
| 投稿时间：2012-09-05 修订日期：2012-12-01 |
| DOI：10.3969/j.issn.1674-6457.2013.01.007 |
| 中文关键词: 铝合金 壳体件 压力铸造 数值模拟 |
| 英文关键词: aluminium alloy shell part die casting numerical simulation |
| 基金项目: |
|
| 摘要点击次数: 5147 |
| 全文下载次数: 4553 |
| 中文摘要: |
| 基于 UG 平台设计了铝合金壳体压铸件的浇注系统和排溢系统,并运用铸造模拟软件 Anycasting进行了数值模拟。 通过分析铸件的充型及凝固过程,判断设计的合理性。 模拟结果表明, 在压射速度为 2m / s,浇注温度为 670 ℃ ,模具预热温度为 180 ℃ 的条件下,铸件充型平稳,无明显缺陷。 |
| 英文摘要: |
| Pouring system and exhaust overflow system of the aluminum alloy shell die castings were designed based on the UG platform, and the casting simulation software Anycasting was used to simulate. By the analysis of casting filling and solidification process the rationality of the design was judged. The simulative results show that the cavities of the casting are stably filled with no significant defect under the condition that injecting speed is 2 m / s, pouring temperate is 650 ℃ , die preheating temperature is180 ℃ . |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501719号