樊黎霞,王贺,王志刚.身管膛线精锻成形金属流动与变形分析[J].精密成形工程,2013,5(1):20-24.
FAN Li-xia,WANG He,WANG Zhi-gang.Analysis of Metal Flow in Radial Forging Process for Barrel Rifling[J].Journal of Netshape Forming Engineering,2013,5(1):20-24. |
| 身管膛线精锻成形金属流动与变形分析 |
| Analysis of Metal Flow in Radial Forging Process for Barrel Rifling |
| 投稿时间：2012-08-22 修订日期：2012-12-01 |
| DOI：10.3969/j.issn.1674-6457.2013.01.006 |
| 中文关键词: 径向锻造 膛线成形 金属流动 工艺参数 有限元分析 |
| 英文关键词: radial forging rifling forming metal flow process parameters finite element analysis |
| 基金项目: |
|
| 摘要点击次数: 5573 |
| 全文下载次数: 4477 |
| 中文摘要: |
| 以某身管膛线精锻加工过程为研究对象,使用通用有限元商业软件 Abaqus 建立了三维轴对称有限元模型,对身管膛线的成形过程进行数值模拟,分析了膛线嵌入芯棒过程中的金属流动情况。 此外,还分析了芯棒结构及断面减缩率对膛线成形的影响,为实际加工过程中工艺参数的选取提供依据。 |
| 英文摘要: |
| A 3D axisymmetric FEA model was built by the commercial finite element code Abaqus to simulate the deformation of the barrel rifling during the radial forging process and the metal flow during the rifling forming process was analyzed. Additionally, the influence of the mandrel and the percentage of reduction were investigated in order to optimize the process parameters. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号