马更生,田雅琴,王海澜.压力矫直厚壁钢管的载荷-挠度模型研究[J].精密成形工程,2013,5(1):8-11.
MA Geng-sheng,TIAN Ya-qin,WANG Hai-lan.Study of Load-deflection Model of Pressure Straightening Process for Thick-walled Steel Pipe[J].Journal of Netshape Forming Engineering,2013,5(1):8-11. |
| 压力矫直厚壁钢管的载荷-挠度模型研究 |
| Study of Load-deflection Model of Pressure Straightening Process for Thick-walled Steel Pipe |
| 投稿时间：2012-05-12 修订日期：2012-12-01 |
| DOI：10.3969/j.issn.1674-6457.2013.01.003 |
| 中文关键词: 厚壁钢管 压力矫直 载荷-挠度模型 有限元 |
| 英文关键词: load-deflection model pressure straightening thick-walled steel pipe finite element |
| 基金项目:太原科技大学校青年基金项目(20103009) |
|
| 摘要点击次数: 5135 |
| 全文下载次数: 3896 |
| 中文摘要: |
| 依据弹塑性理论,对压力矫直理想弹塑性材料的厚壁钢管过程进行分析,针对其弹塑性弯曲阶段的塑性变形是否深入到内径,分别给出了 2 种情况的载荷-挠度数学模型,并通过有限元分析软件 Ansys 和实验对该模型进行了验证,结果表明该模型具有较高的精度。 |
| 英文摘要: |
| Based on the elastic-plastic mechanics theory the process of the pressure straightening for ideal elastic-plastic thickwalled steel pipe is analyzed. According to whether the plastic deformation of the elastic-plastic bending stage to inner diameter, the mathematical load-deflection model is established, the model is verified by finite element software Ansys and experiment. The results show that the model has high precision. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号