李君,王炯,田庄,等.基于UG的渐开线型涡旋盘参数化建模设计[J].精密成形工程,2012,4(6):132-135.
LI Jun,WANG Jiong,TIAN Zhuang,et al.Research on the Parametric Modeling of Involute Scroll based on UG[J].Journal of Netshape Forming Engineering,2012,4(6):132-135. |
| 基于UG的渐开线型涡旋盘参数化建模设计 |
| Research on the Parametric Modeling of Involute Scroll based on UG |
| 投稿时间：2012-09-10 修订日期：2012-11-10 |
| DOI： |
| 中文关键词: 涡旋盘 渐开线 UG 参数化 |
| 英文关键词: scroll involute UG parameterization |
| 基金项目: |
|
| 摘要点击次数: 4380 |
| 全文下载次数: 4242 |
| 中文摘要: |
| 以渐开线型涡旋盘为例，研究其涡旋型线方程，利用UG参数化特征建模技术，将其转换为表达式方程，对基圆渐开线型涡旋盘进行三维造型。通过各参数之间的关联和约束，实现整体参数的自动更新，为渐开线型涡旋盘的参数化建模提供模型，为复杂曲线的设计和建模提供指导和借鉴，从而提高产品设计的效率，降低设计人员的劳动强度。 |
| 英文摘要: |
| Taking the involute scroll for example, the scroll line equation is researched and the equation is converted into expression equation by the UG parametic feature modeling techniques, then three-dimensional modeling is realized on the base circle involute scroll. By the association between various parameters and constraints, the overall parameters are automatically updated, providing models for parametric modeling of involute scroll, providing guidance and reference for the design and modeling of complex curves, thus improving the efficiency of product design, reducing the labor intensity of designers. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501719号