梁辰,孔炎,薛克敏.保持圈冲压成形工艺设计[J].精密成形工程,2012,4(6):95-98.
LIANG Chen,KONG Yan,XUE Ke-min.Design on the Forming Process of the Bearing Cage[J].Journal of Netshape Forming Engineering,2012,4(6):95-98. |
| 保持圈冲压成形工艺设计 |
| Design on the Forming Process of the Bearing Cage |
| 投稿时间：2012-09-10 修订日期：2012-11-10 |
| DOI： |
| 中文关键词: 保持圈 局部胀形 厚度变化 起皱 |
| 英文关键词: bearing cage local bulging process thickness variation wrinkling |
| 基金项目: |
|
| 摘要点击次数: 4123 |
| 全文下载次数: 3203 |
| 中文摘要: |
| 对保持圈的冲压成形工艺进行了分析、设计，同时对保持圈的局部胀形过程进行了数值模拟。利用Dynaform软件针对凸台的局部胀形厚度变化及起皱倾向进行了模拟，分析表明了局部胀形工艺在保持圈成形中的可行性，提高了材料的利用率，为工程应用提供了依据。 |
| 英文摘要: |
| The forming process of the bearing cage is designed and numerical simulation based on Dynaform is used to analyze the local bulging process. Thickness variation and wrinkling tendency of the boss are of emphasis. And the result shows the feasibility of local bulging of the bearing cage during the forming process. The material utilization is improved and the foundation is provided for the engineering applications. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号