张晓明,张建保,王丽俊.制动缸前盖拉深工艺分析[J].精密成形工程,2012,4(6):61-63.
ZHANG Xiao-ming,ZHANG Jian-bao,WANG Li-jun.Analysis on Drawing Process of the Front Cover of Brake Cylinder[J].Journal of Netshape Forming Engineering,2012,4(6):61-63. |
| 制动缸前盖拉深工艺分析 |
| Analysis on Drawing Process of the Front Cover of Brake Cylinder |
| 投稿时间：2012-09-10 修订日期：2012-11-10 |
| DOI： |
| 中文关键词: 制动缸前盖 锥形拉深 拉深系数 模具设计 |
| 英文关键词: front cover of brake cylinder tapered drawing drawing degree mold design |
| 基金项目: |
|
| 摘要点击次数: 4052 |
| 全文下载次数: 3521 |
| 中文摘要: |
| 通过对制动缸前盖拉深成形的工艺分析和计算, 合理分配拉深系数，并进行模具设计，经试制试验，最终制定出一套确实可行的拉深工艺，成功实现了旋压密封式制动缸前盖拉深成形。 |
| 英文摘要: |
| After analyzing and calculating drawing process of the front cover of brake cylinder, the drawing degree is allocated properly, the mold is designed. A set of feasible drawing processes are determined by trial test. Finally the front cover of spinning sealed brake cylinder is drawn successfully. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号