王政,董洪波,凌志伟.TC21合金在形变热处理工艺下的组织特征[J].精密成形工程,2012,4(6):38-40,70.
WANG Zheng,DONG Hong-bo,LING Zhi-wei.Microstructure Characteristic of TC21 Alloy with Thermomechanical Treatment Process[J].Journal of Netshape Forming Engineering,2012,4(6):38-40,70. |
| TC21合金在形变热处理工艺下的组织特征 |
| Microstructure Characteristic of TC21 Alloy with Thermomechanical Treatment Process |
| 投稿时间：2012-09-10 修订日期：2012-11-10 |
| DOI： |
| 中文关键词: TC21合金 超塑拉伸 双重退火 |
| 英文关键词: TC21 alloy superplastic tensile forming double annealing microstructure |
| 基金项目:航空科学基金项目(2010ZE56016); 江西省教育厅科学技术研究项目(GJJ12425) |
|
| 摘要点击次数: 4113 |
| 全文下载次数: 3453 |
| 中文摘要: |
| 对TC21钛合金在不同条件下超塑拉伸后，进行双重退火热处理，研究热加工工艺对TC21合金显微组织演变的影响。结果表明，当变形温度在890～960 ℃时，TC21合金的伸长率随变形温度的增加先增加后减少，最佳超塑性变形温度为910 ℃;TC21合金在α+β相区超塑变形，然后在α+β相区双重退火处理后得到双态组织；在β区进行超塑变形、α+β相区双重退火处理后得到网篮组织。 |
| 英文摘要: |
| After superplastic tensile forming and double annealing heat treatment at different conditions, the effect of hot working technology on microstructure evolution of TC21 titanium alloy was investigated. The results show that at the temperature of 890～960 ℃, the elongation of TC21 alloy firstly increases and then decreases with the increase of deformation temperature. The optimal superplastic deformation temperature is 910 ℃. After superplastic deformation and double annealing treatment in α+β phase zone，the microstructure of TC21 alloy is duplex structure,After superplastic deformation in β phase zone and double annealing treatment in α+β phase zone，the microstructure of TC21 alloy is basketweave structure. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号