石海城,贺玉民,牛胜军,等.薄壁铝质筒形件加工工艺的研究[J].精密成形工程,2012,4(5):85-88.
SHI Hai-cheng,HE Yu-min,NIU Sheng-jun,et al.Processing Technology Study on Thin-wall Aluminum Cylinder Part[J].Journal of Netshape Forming Engineering,2012,4(5):85-88. |
| 薄壁铝质筒形件加工工艺的研究 |
| Processing Technology Study on Thin-wall Aluminum Cylinder Part |
| 投稿时间：2012-06-10 修订日期：2012-09-10 |
| DOI： |
| 中文关键词: 旋压 加工工艺 工艺参数 |
| 英文关键词: flow-forming processing technology technological parameter |
| 基金项目: |
|
| 摘要点击次数: 4028 |
| 全文下载次数: 3361 |
| 中文摘要: |
| 通过对给定零件传统加工方案和旋压加工方案的对比分析，从旋压设备、工艺装配和工艺参数等几个方面入手，经实践加工验证，提出了既能保证产品机械性能，又能保证产品质量和精度的旋压加工工艺方案，可以作为典型的旋压加工工艺加以推广。 |
| 英文摘要: |
| The flow-forming processing scheme and the conventional method are compared for a thin-wall aluminum cylinder part from flow-forming equipment, assembly and processing parameters. By practical processing verification a new forming process is put forward by which not only the mechanical property of the product is guraranteed, but also the product quality and accuracy. It can be generalized as a typical processing technology for promotion. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号