张雷,姜春茂,刘有江,等.铝合金筒形件强力旋压成形件的疵病分析[J].精密成形工程,2012,4(5):55-57,84.
ZHANG Lei,JIANG Chun-mao,LIU You-jiang,et al.Defects Analysis of Aluminum Alloy Cylinder Power Spinning[J].Journal of Netshape Forming Engineering,2012,4(5):55-57,84. |
| 铝合金筒形件强力旋压成形件的疵病分析 |
| Defects Analysis of Aluminum Alloy Cylinder Power Spinning |
| 投稿时间：2012-08-10 修订日期：2012-09-10 |
| DOI： |
| 中文关键词: 铝合金 筒形件 旋压成形 |
| 英文关键词: aluminum alloy cylinder spinning forming |
| 基金项目: |
|
| 摘要点击次数: 4274 |
| 全文下载次数: 3179 |
| 中文摘要: |
| 介绍了某产品铝合金筒形件的旋压成形加工过程，模具材料选择，旋压前毛坯处，确定了旋压工艺参数，分析了旋压成形过程中产生的质量问题。通过实践证明，该项工艺技术可行。 |
| 英文摘要: |
| The spinning processing, mold material selection, blank processing before spinning, spinning process parameters and quality problem analysis in spinning process of an aluminum alloy cylinder for a product are introduced. Through the practice the technology is proved feasible and the gap in spinning production for military parts is filled in, a breakthrough in extra super duralumin alloy spinning is made. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501719号