夏源,李聪.某汽车零件注塑模设计及成形过程CAE分析[J].精密成形工程,2012,4(4):59-64.
XIA Yuan,LI Cong.Design of Injection Mould and Processing for Automobile Part[J].Journal of Netshape Forming Engineering,2012,4(4):59-64. |
| 某汽车零件注塑模设计及成形过程CAE分析 |
| Design of Injection Mould and Processing for Automobile Part |
| 投稿时间：2011-10-18 修订日期：2012-07-10 |
| DOI： |
| 中文关键词: 汽车零件 Moldflow分析 模具设计 |
| 英文关键词: automobile part Moldflow analysis mould design |
| 基金项目: |
|
| 摘要点击次数: 4317 |
| 全文下载次数: 3441 |
| 中文摘要: |
| 在综合考虑某塑件成形工艺特点的基础上，确定该塑件的模具结构方案，设计注塑模具，并在理论设计基础上绘制模具装配图，分析模具工作原理，然后通过三维造型软件对模具进行实体造型，最后利用Moldflow软件对塑件进行成形性能分析。 |
| 英文摘要: |
| On the basis of considering the molding the molding process characteristics of a plastic part, the mold structural scheme, injection mold, and mold assembly were designed, mold working principle was analyzed, and then 3D modeling was conducted, finally the forming performance of the plastic part was analyzed by Moldflow software. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号