郑明玉,谢晋市,陈文琳,等.直齿圆柱齿轮温锻成形工艺参数优化[J].精密成形工程,2012,4(3):14-18.
ZHENG Ming-yu,XIE Jin-shi,CHEN Wen-lin,et al.Process Parameters Optimization for Spur Gear Warm Forging[J].Journal of Netshape Forming Engineering,2012,4(3):14-18. |
| 直齿圆柱齿轮温锻成形工艺参数优化 |
| Process Parameters Optimization for Spur Gear Warm Forging |
| 投稿时间：2011-10-10 修订日期：2012-05-10 |
| DOI： |
| 中文关键词: 直齿轮 温成形 参数优化 正交试验 |
| 英文关键词: spur gear warm forging parameter optimization orthogonal experiment |
| 基金项目: |
|
| 摘要点击次数: 4142 |
| 全文下载次数: 3284 |
| 中文摘要: |
| 对直齿轮温锻成形过程进行数值模拟，选取不同参数和水平进行正交试验设计，将齿轮的成形力和凹模模具磨损作为两项指标，并基于该两项指标分析试验结果，得出坯料初始温度、模具预热温度、工模间摩擦系数、锻压速度对成形过程的影响，并获得较优的工艺参数值。模拟结果与实验结果吻合，对实际生产起到了指导作用。 |
| 英文摘要: |
| The process of spur gear warm forging was simulated with different factors and different levels being chosen in the orthogonal experiment．Based on the forming force and the value of die wear, rationalized technological parameters were obtained including initial temperature of blank, preheat temperature of die, the friction coefficient and pushing speed．So that certain theory guidance was provided to draft the process of warm forging and to improve the die life. The simulation is in agreement with experimental results. It has provided a theoretical basis to guide the practical production. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号