林芳,鄂大辛,张敬文.单元类型对有限元计算弯管截面畸变及壁厚变化的影响[J].精密成形工程,2012,4(3):10-13.
LIN Fang,E Da-xin,ZHANG Jing-wen.Effects of Element Types on Cross Sectional Distortion and Wall Thickness Variation in Finite Element Simulation[J].Journal of Netshape Forming Engineering,2012,4(3):10-13. |
| 单元类型对有限元计算弯管截面畸变及壁厚变化的影响 |
| Effects of Element Types on Cross Sectional Distortion and Wall Thickness Variation in Finite Element Simulation |
| 投稿时间：2011-12-05 修订日期：2012-05-10 |
| DOI： |
| 中文关键词: 管材弯曲 单元类型 壁厚变化 起皱 |
| 英文关键词: tube bending element type wall thickness variation wrinkling |
| 基金项目: |
|
| 摘要点击次数: 4458 |
| 全文下载次数: 3427 |
| 中文摘要: |
| |
| 英文摘要: |
| Based on rotary drawing bending tests of 1Cr18Ni9Ti tubes,finite element (FE) simulations were performed employing solid element and shell element respectively. It is revealed that ,both of the simulated results of solid element and shell element can characterize actual tube bending process and performances following bending while there exists acertain discrepancy in two elements. Compared with shell element ,solid element may reflectthe stress-strain state more accurately and provide a more correct result of cross sectional distortion during the bending operation. Butthe shell elementis more suitable than solid element in predicting wall thickness variation and the severity of wrinkling. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501719号