张敬文,鄂大辛,李延民,等.弯模间隙对5A06管弯曲横截面畸变及壁厚变化的影响[J].精密成形工程,2012,4(2):19-22.
ZHANG Jing-wen,E Da-xin,LI Yan-min,et al.Effects of Clearance on Cross Sectional Distortion and Wall Thickness Variation of 5A06 Tube[J].Journal of Netshape Forming Engineering,2012,4(2):19-22. |
| 弯模间隙对5A06管弯曲横截面畸变及壁厚变化的影响 |
| Effects of Clearance on Cross Sectional Distortion and Wall Thickness Variation of 5A06 Tube |
| 投稿时间：2011-10-23 修订日期：2012-03-10 |
| DOI： |
| 中文关键词: 弯模间隙 横截面畸变 壁厚变化 |
| 英文关键词: clearance cross section distortion wall thickness variation |
| 基金项目: |
|
| 摘要点击次数: 4406 |
| 全文下载次数: 3720 |
| 中文摘要: |
| 通过对5A06管材的弯曲实验和不同弯模间隙下的有限元模拟发现：弯管横截面长、短轴变化率和外侧壁厚减薄均随弯曲模间隙的增大而增大，弯管内侧壁厚增厚随弯曲模间隙的增大而减小。采用弯模实际装配间隙进行建模，可获取与实际弯曲更为接近的仿真效果并提高计算精度。 |
| 英文摘要: |
| Tube bending tests combined with finite element analysis for 5A06 tubes in different clearances under rotary draw bending are performed. It is revealed that length variation rates of cross section in the major and minor axial directions increase as clearance increases, as well as wall thinning in the outer side of tube. Conversely, wall thickening in the inner side of tube reduces with the accretion of clearance. Simulation results closer to tests are obtained by employing finite element model based on clearance in actual mould assembly, by which a higher computation precision is obtained. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501719号