陶琳,程明,宋广胜,等.Inconel 625合金高速热变形动态再结晶的临界条件[J].精密成形工程,2012,4(2):1-5.
TAO Lin,CHENG Ming,SONG Guang-sheng,et al.Critical Conditions of Dynamic Recrystallization during High Speed Hot Deformation of Inconel 625 Alloy[J].Journal of Netshape Forming Engineering,2012,4(2):1-5. |
| Inconel 625合金高速热变形动态再结晶的临界条件 |
| Critical Conditions of Dynamic Recrystallization during High Speed Hot Deformation of Inconel 625 Alloy |
| 投稿时间：2011-12-05 修订日期：2012-03-10 |
| DOI： |
| 中文关键词: Inconel 625合金 加工硬化率 动态再结晶 临界应变 |
| 英文关键词: Inconel 625 alloy work hardening rate dynamic recrystallization critical strain |
| 基金项目:国家自然科学基金钢铁联合基金重点项目资助（50834008） |
|
| 摘要点击次数: 4577 |
| 全文下载次数: 3330 |
| 中文摘要: |
| 通过等温热压缩试验获得Inconel 625合金在变形温度为1000~1200 ℃，应变速率为1~80 s-1条件下的真应力应变曲线，利用加工硬化率，结合 ln θ-ε曲线上的拐点判据及-(ln θ)/ε-ε曲线上的最小值，来研究Inconel 625合金动态再结晶的临界条件。结果表明，在本实验条件下，Inconel 625合金的ln θ-ε曲线均出现拐点特征，对应的-(ln θ)/ε-ε曲线出现最小值，该最小值处对应的应变即为临界应变；临界应变随应变速率的增大和变形温度的降低而增加，并且临界应变和峰值应变之间有一定的关系，即ε-c=0.69ε-p；动态再结晶时临界应变的预测模型可以表示为ε-c=4.41×10-4Z0.142 61 。 |
| 英文摘要: |
| Hot compression tests of Inconel 625 alloy were conducted at deformation temperature range of 1000~1200 ℃ and strain rates of 1~80 s-1 to obtain true stress-true strain curves. The critical conditions of dynamic recrystallization for Inconel 625 alloy were studied by using the work hardening rate θ, combined with the inflection point criterion of ln θ-ε curves and the minimum value of -(ln θ)/ε-ε curves. The results indicate that the ln θ-ε curve of Inconel 625 alloy presents the inflection point, and a minimum value of -(ln θ)/ε-ε curve appears, which means the critical strain ε-c. The critical strain increases with the strain rate increasing and the temperature decreasing. And there is a relationship between the critical strain ε-c and peak strain ε-p, i.e.ε-c=0.69ε-p. The predicting model of critical strain is described as ε-c=4.41×10-4Z0.142 61 . |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号