郎利辉,谢亚苏,王永铭.飞机大型复杂双曲度蒙皮充液成形数值模拟及实验研究[J].精密成形工程,2011,3(6):112-116.
LANG Li-hui,XIE Ya-su,WANG Yong-ming.Aircraft Large Complex Double Curvature Skin Hydroforming Numerical Simulation and Experiment Research[J].Journal of Netshape Forming Engineering,2011,3(6):112-116. |
| 飞机大型复杂双曲度蒙皮充液成形数值模拟及实验研究 |
| Aircraft Large Complex Double Curvature Skin Hydroforming Numerical Simulation and Experiment Research |
| 投稿时间：2011-10-10 修订日期：2011-11-10 |
| DOI： |
| 中文关键词: 复杂双曲度蒙皮 充液成形 数值模拟 |
| 英文关键词: complex double curvature skin hydroforming numerical simulation |
| 基金项目: |
|
| 摘要点击次数: 4101 |
| 全文下载次数: 3403 |
| 中文摘要: |
| 利用充液成形工艺完成了飞机大型复杂双曲度蒙皮类零件的成形。通过对零件成形过程进行工艺分析与数值模拟，确定了加工时所需工艺参数，并通过试验验证了数值模拟结果。分析了成形过程中出现的2种典型缺陷，最终加工出了达到零件精确成形要求的合格件。 |
| 英文摘要: |
| Using hydroforming process the forming of aircraft large complex double curvature covering parts was completed. The process parameters through analyzing the forming process and numerical simulation were obtained. The simulation results by experiments were verified. Two kinds of typical defects in the forming process were analysed. Finally the part with qualified requirements was formed. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号