邵一川,李大永,彭颖红.管材滚压剪切有限元分析[J].精密成形工程,2011,3(6):88-92.
SHAO Yi-chuan,LI Da-yong,PENG Ying-hong.Investigation into Pipe Roll-cutting with FEM[J].Journal of Netshape Forming Engineering,2011,3(6):88-92. |
| 管材滚压剪切有限元分析 |
| Investigation into Pipe Roll-cutting with FEM |
| 投稿时间：2011-10-10 修订日期：2011-11-10 |
| DOI： |
| 中文关键词: 韧性断裂 管材滚压剪切 有限元 滚切力 |
| 英文关键词: ductile fracture pipe roll-cutting finite element method cutting force |
| 基金项目:上海市教委科研创新项目(11CXY10); 上海市科委项目(10QH1401400,09JC1407000) |
|
| 摘要点击次数: 4168 |
| 全文下载次数: 3508 |
| 中文摘要: |
| 基于DEFORM 3D有限元软件建立了管材滚压剪切的三维有限元模型，并对不同工艺参数下的管材滚压剪切过程进行了解析计算。选用Johnson-cook模型作为材料的断裂损伤模型，经过试算和比较得到合适的材料损伤参数。分析了进刀率、刀具楔角以及管材壁厚等参数对刀具的载荷、管材实际切断深度的影响规律。研究结果将为管材实际切割的参数设定提供理论依据。 |
| 英文摘要: |
| A 3D finite element model of pipe roll-cutting was built up under DEFORM 3D software environment. FE analysis was carried out under different parameter configurations with this model. Johnson-Cook model was utilized to fulfill the modeling of material damage and fracture. Further, the influences of feed rates, pipe thickness and wedge angles on the reaction force of blade were analyzed thoroughly. The simulation results provide guidelines for practical cutting process of pipe. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号