任强,李大永,邹天下,等.UOE焊管成形三维有限元模拟[J].精密成形工程,2011,3(6):80-84.
REN Qiang,LI Da-yong,ZOU Tian-xia,et al.The Simulation of UOE Pipe Forming by Three-dimensional Finite Element Method[J].Journal of Netshape Forming Engineering,2011,3(6):80-84. |
| UOE焊管成形三维有限元模拟 |
| The Simulation of UOE Pipe Forming by Three-dimensional Finite Element Method |
| 投稿时间：2011-10-10 修订日期：2011-11-10 |
| DOI： |
| 中文关键词: 焊管 UOE成形 有限元方法 |
| 英文关键词: weld pipe UOE forming finite element method |
| 基金项目:上海市教委科研创新项目（11CXY10）；上海市科委项目（10QH1401400,09JC1407000） |
|
| 摘要点击次数: 4459 |
| 全文下载次数: 3280 |
| 中文摘要: |
| 建立了UOE焊管成形过程的三维有限元模型，模拟具有大变形和复杂接触的成形过程，分析板料各个成形段的回弹，获得了不同成形段板料的变形构形、等效塑性应变分布以及成形载荷的变化。研究结果可为UOE工艺设计以及评估成形机组制管能力提供指导。 |
| 英文摘要: |
| In this study, the three-dimensional finite element model of the UOE forming process has been established. The large deformation and complex contact during UOE forming process are simulated, and the spring back after forming is also calculated. The deformed geometries of different steps as long as distribution of the equivalent plastic strain and the force are obtained. The research is helpful in UOE forming process design and evaluating the capability of the pipe mill. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501719号