王高潮,李娟,徐雪峰,等.TC6钛合金的超塑变形机制研究[J].精密成形工程,2011,3(6):22-26.
WANG Gao-chao,LI Juan,XU Xue-feng,et al.Study on the Superplastic Deformation Mechanism of Ti-Alloy TC6[J].Journal of Netshape Forming Engineering,2011,3(6):22-26. |
| TC6钛合金的超塑变形机制研究 |
| Study on the Superplastic Deformation Mechanism of Ti-Alloy TC6 |
| 投稿时间：2011-10-10 修订日期：2011-11-10 |
| DOI： |
| 中文关键词: TC6 高效超塑变形 超塑性 最大m值超塑变形 |
| 英文关键词: TC6 high-efficiency superplastic deformation superplasticity maximum m SPD |
| 基金项目:国家自然科学基金资助项目（51075196） |
|
| 摘要点击次数: 4468 |
| 全文下载次数: 3360 |
| 中文摘要: |
| 提出了一种全新的超塑性研究方法：基于m值的高效超塑变形机制。采用该方法对TC6钛合金进行高温拉伸实验，研究其超塑性能，并与最大m值法超塑性进行比较分析。实验结果表明，细晶组织的该合金具有优良的超塑性，最佳变形温度在900 ℃，最大m值超塑变形可以获得20倍的最大延伸率；基于m值的高效超塑变形可以显著提高超塑成形效率，在获得延伸率为16.96倍的优良超塑性前提下，成形效率可提高13倍。 |
| 英文摘要: |
| A new superplastic deformation approach, the so-called high-efficiency superplastic deformation (HESPD) based on m value is proposed in this research and its mechanism is investigated via the superplastic deformation (SPD) of TC6 Ti-alloy by using the proposed approach. Through the physical experiments, the approach is compared with the maximum m SPD and it is shown that the Ti-alloy with fined microstructure behaves excellent SPD capacity. At the deformation temperature of 900 ℃, the best elongation of 2 000% is obtained by using the maximum m SPD. While with the HESPD, the elongation of the Ti-alloy is 1 696%,and the deformation efficiency is increased by 13 times. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号