毛华杰,陈荣创,刘君.基于单元法向插值的模面回弹补偿方法研究[J].精密成形工程,2011,3(6):18-21,60.
MAO Hua-jie,CHEN Rong-chuang,LIU Jun.Mould Springback Compensation Method Based on Element Normal Direction Interpolation[J].Journal of Netshape Forming Engineering,2011,3(6):18-21,60. |
| 基于单元法向插值的模面回弹补偿方法研究 |
| Mould Springback Compensation Method Based on Element Normal Direction Interpolation |
| 投稿时间：2011-10-10 修订日期：2011-11-10 |
| DOI： |
| 中文关键词: 回弹 模具补偿 回弹补偿 偏差修正 |
| 英文关键词: springback mould compensation springback compensation error correction |
| 基金项目: |
|
| 摘要点击次数: 3961 |
| 全文下载次数: 3517 |
| 中文摘要: |
| 从理论上阐述了连线补偿与法向补偿的差异及适用情况，提出了基于单元法向的插值补偿方法，将其运用于S梁的回弹补偿。有限元分析结果表明，插值补偿法将零件回弹偏差减小了73%，能有效修正板料冲压成形回弹偏差。 |
| 英文摘要: |
| Mould compensation is an effective way to eliminate springback for sheet forming process. Displacement Adjustment method is efficient in springback correction, but computation accuracy and iteration speed vary greatly when compensation direction changes. Differences between reverse displacement compensation method(DD) and reverse normal compensation method(ND) are analyzed theoretically, and the applied characteristics for each are studied. An interpolation compensation method, which is based on judgment of element normal direction, is proposed and applied in springback compensation of S-rail. FE result shows that springback error is reduced by 73% after interpolation compensation, and interpolation compensation method is effective in springback correction for sheet forming. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501719号