陈文琳,刘桥求,彭李静,等.转向节预锻件坯料的优化[J].精密成形工程,2011,3(4):12-15.
CHEN Wen-lin,LIU Qiao-qiu,PENG Li-jing,et al.Optimization of the Pre-forging of Steering Knuckle[J].Journal of Netshape Forming Engineering,2011,3(4):12-15. |
| 转向节预锻件坯料的优化 |
| Optimization of the Pre-forging of Steering Knuckle |
| 投稿时间：2010-09-14 修订日期：2011-07-10 |
| DOI： |
| 中文关键词: 转向节 预锻件优化 计算截面面积 有限元 |
| 英文关键词: steering knuckle pre-forging optimization calculated cross-sectional area FEM |
| 基金项目: |
|
| 摘要点击次数: 4087 |
| 全文下载次数: 3410 |
| 中文摘要: |
| 以汽车转向节为研究对象，以转向节终锻件为目标，运用计算截面积的方法对获得终锻件飞边截面积的大小进行修正，从而修改预锻件对应截面的截面积大小以达到优化预锻件的目的。通过反复的修正和修改，最终获得最优的预锻件，提高了材料利用率和模具寿命，对复杂锻件的坯料优化具有借鉴作用。 |
| 英文摘要: |
| The method of calculated cross-sectional area was used to amend the cross-sectional area of the final forging flash for the automotive steering knuckle forging, so that the corresponding cross-section area of the pre-forging was modified to optimize the pre-forging. Through repeated amendments and modifications, the best pre-forging parts were got ultimately, the material utilization and die life were improved,which provided reference to the optimization of complex forgings. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号