彭成允,邹强,李小平,等.基于数值模拟的盒形件拉深成形变拉深筋技术研究[J].精密成形工程,2011,3(4):4-6,29.
PENG Cheng-yun,ZOU Qiang,LI Xiao-ping,et al.Study of Variable Draw Bead Technology for Rectangular Box Drawing Based on Numerical Simulation[J].Journal of Netshape Forming Engineering,2011,3(4):4-6,29. |
| 基于数值模拟的盒形件拉深成形变拉深筋技术研究 |
| Study of Variable Draw Bead Technology for Rectangular Box Drawing Based on Numerical Simulation |
| 投稿时间：2011-04-02 修订日期：2011-07-10 |
| DOI： |
| 中文关键词: 盒形件 数值模拟 变拉深筋 |
| 英文关键词: rectangular box numerical simulation variable draw bead |
| 基金项目:重庆市科委科技攻关一般项目（CSTC,2010AC3084）；重庆市教委科学技术研究项目（2007CJ29）；重庆工学院科研启动基金项目（2005ZD87） |
|
| 摘要点击次数: 3888 |
| 全文下载次数: 3265 |
| 中文摘要: |
| 以盒形件为研究对象, 建立了盒形件拉延筋成形的数值模型，分别对盒形件固定拉深筋和变拉深筋成形进行了数值模拟研究, 并进行了工程试验的验证，对结果及误差进行了分析，实现了基于拉深筋高度变化的变拉深筋技术。这种方法能有效发挥板料成形性能, 提高零件拉深成形质量。 |
| 英文摘要: |
| The numerical model of rectangular box drawbead forming was established. The fixed and variable drawbead forming was simulated and the simulation was verified by engineering experiment.The results and error were analyzed. The technology of variable draw bead was carried out based on adjusting the height of draw bead. So sheet metal formability can be exploited fully and products quality was improved. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号