赵磊,梁卫抗,郑金星,等.顶盖内板拉深工艺分析及模具设计[J].精密成形工程,2011,3(3):72-75.
ZHAO Lei,LIANG Wei-kang,ZHENG Jin-xing,et al.Drawing Process Analysis and Die Design for Top Cover Plate[J].Journal of Netshape Forming Engineering,2011,3(3):72-75. |
| 顶盖内板拉深工艺分析及模具设计 |
| Drawing Process Analysis and Die Design for Top Cover Plate |
| 投稿时间：2010-12-12 修订日期：2011-05-10 |
| DOI： |
| 中文关键词: 顶盖内板 冲压工艺 有限元模拟 模具设计 |
| 英文关键词: top cover plate stamping process FEM die design |
| 基金项目: |
|
| 摘要点击次数: 3785 |
| 全文下载次数: 3080 |
| 中文摘要: |
| 根据顶盖内板的结构特点，分析了零件的冲压工艺性，确定了成形步骤。为获得成形质量良好的零件，以有限元模拟软件Autoform为平台，对零件的拉深成形过程进行了模拟。以模拟结果为依据，指导并详细介绍了各个工序模具的设计要求和整体结构。生产试验表明：有限元模拟结果准确度高，模具设计合理，结构可靠，能保证零件的成形质量，满足批量生产的要求。 |
| 英文摘要: |
| According to structural characteristics of the top cover plate, the stamping process was analyzed, and the forming steps were determined. To require high quality stamped part, the drawing forming process of top cover plate was simulated based on finite element analysis software Autoform. The simulation results were used to guide die design of every step, and the design requirement and general structure of dies were introduced in detail. Actual production indicates that simulation results and mold structure design are reliable, which can ensure the forming quality of parts and meet the requirements of mass production. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号