陈晓伟,池成忠,白庆平.齿轮温锻组合凹模设计[J].精密成形工程,2011,3(3):38-41,55.
CHEN Xiao-wei,CHI Cheng-zhong,BAI Qing-ping.Design of Combined Die of Warm Forging of Gear[J].Journal of Netshape Forming Engineering,2011,3(3):38-41,55. |
| 齿轮温锻组合凹模设计 |
| Design of Combined Die of Warm Forging of Gear |
| 投稿时间：2011-01-08 修订日期：2011-05-10 |
| DOI： |
| 中文关键词: 温锻 组合凹模 强度校核 |
| 英文关键词: warm forging combined die strength check |
| 基金项目: |
|
| 摘要点击次数: 4001 |
| 全文下载次数: 3033 |
| 中文摘要: |
| 运用Pro/E 4.0构建齿轮模型得出齿轮横截面积，把凹模齿形部分看成当量圆，通过齿轮横截面积得到当量直径，从而利用Lame公式理论计算与经验数据的有效结合，对齿轮温锻成形的组合凹模进行优化设计和强度校核。 |
| 英文摘要: |
| The model of gear is constructed by Pro/e 4.0 to get the cross sectional area of gear. Taking tooth form of female die as equivalent circle, the equivalent diameter is obtained through the cross sectional area of gear, so that optimal design and strength check of the combined die in warm forging of gears can be carried out by effective combination of theoretic calculation of formula of Lame and experiential data. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号