杨海鹏.注塑件出现质量问题的原因与防止措施[J].精密成形工程,2011,3(2):85-88.
YANG Hai-peng.Injection Molding Quality Flaw and Improvement Measure[J].Journal of Netshape Forming Engineering,2011,3(2):85-88. |
| 注塑件出现质量问题的原因与防止措施 |
| Injection Molding Quality Flaw and Improvement Measure |
| 投稿时间：2010-11-25 修订日期：2011-03-10 |
| DOI： |
| 中文关键词: 注塑件质量 注塑成形工艺 注塑成形模具 质量改进 |
| 英文关键词: injection molding quality injection molding technology injection molding mold quality improvement |
| 基金项目: |
|
| 摘要点击次数: 4729 |
| 全文下载次数: 4581 |
| 中文摘要: |
| 针对塑料原材料、塑料件结构、注塑成形工艺条件、注塑模具、注塑设备等方面，对注塑件出现质量问题的原因进行了分析，并提出了预防和改进措施，提高了注塑件质量，降低了生产成本。 |
| 英文摘要: |
| The causes of injection molding quality flaw are analysed from plastic raw materials, the plastic structure, the injection molding technological conditions, mold, equipment etc.. Improvement measures are proposed. Thus the quality of injection molding parts is improved and the production cost is reduced. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号