赵军,胡庆华,朱世凤.机匣体毛坯等温挤压工艺的研究[J].精密成形工程,2011,3(2):73-75,79.
ZHAO Jun,HU Qing-hua,ZHU Shi-feng.Study of Isothermal Extrusion Process for Receiver Blank[J].Journal of Netshape Forming Engineering,2011,3(2):73-75,79. |
| 机匣体毛坯等温挤压工艺的研究 |
| Study of Isothermal Extrusion Process for Receiver Blank |
| 投稿时间：2010-07-13 修订日期：2011-03-10 |
| DOI： |
| 中文关键词: 等温挤压 数值模拟 机匣体 工艺流程设计 |
| 英文关键词: isothermal extrusion numerical simulation receiver process flow design |
| 基金项目: |
|
| 摘要点击次数: 4298 |
| 全文下载次数: 3171 |
| 中文摘要: |
| 主要研究了机匣体毛坯等温挤压工艺的设计方法。在分析机匣体产品特征的基础上，以Deform-3D数值模拟软件为基础，分析了机匣体等温挤压过程的变形规律。以数值模拟结果为参考对象，详细地阐述了机匣体的工艺制定方法与工艺流程设计，为其他采用难成形材料的同类型零件等温挤压工艺设计提供参考。 |
| 英文摘要: |
| The process design method of isothermal extrusion for receiver blank was studied. Based on the geometric characteristic of receiver, the numerical simulation of extrusion process of receiver blank by Deform-3D was carried out, and the deformation rule was analyzed. Process method and process flow design were described in detail. All of these provided a general design method of isothermal extrusion process for similar parts. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号