谭安平,向渝,李才能.基于Moldflow的保险杠不同浇注系统比较分析[J].精密成形工程,2011,3(2):68-72.
TAN An-ping,XIANG Yu,LI Cai-neng.Optimizing Analysis of Gating System for Injecing Bumper Based on Moldflow[J].Journal of Netshape Forming Engineering,2011,3(2):68-72. |
| 基于Moldflow的保险杠不同浇注系统比较分析 |
| Optimizing Analysis of Gating System for Injecing Bumper Based on Moldflow |
| 投稿时间：2010-12-09 修订日期：2011-03-10 |
| DOI： |
| 中文关键词: Moldflow 大型制件 保险杠 浇注系统 比较 CAE |
| 英文关键词: Moldlfow large plastic parts bumper gating system comparison CAE |
| 基金项目: |
|
| 摘要点击次数: 4319 |
| 全文下载次数: 3569 |
| 中文摘要: |
| 为了保证浇注系统的合理性，根据经验设计几种浇注系统，运用CAE软件分析比较后选取最佳的一种。以羚羊轿车前保险杠为研究对象，运用Moldflow软件对2种不同的浇注系统进行CAE模拟分析。通过比较之后选取了最佳的一种三点进浇方案，并以此方案进行了模具设计。 |
| 英文摘要: |
| In order to make sure the rationality of gating system,the most feasible and effective way is to choose several gating systems by experience and choose the best one after comparison. By a type of antelope car bumper as reserching object, two different gating systems are selected and CAE simulation analysis is made. By camparing the simulation results, 3 points gate sytem is choosed as gating system of the car bumper, and the mold is designed according to the plan. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号