吴春冬,赵升吨,周红祥,等.长梯形截面钢板弯曲成形工艺的数值模拟[J].精密成形工程,2011,3(2):34-38.
WU Chun-dong,ZHAO Sheng-dun,ZHOU Hong-xiang,et al.The Bending Process Numerical Simulation of Long Trapezoidal Cross-section Steel Sheet[J].Journal of Netshape Forming Engineering,2011,3(2):34-38. |
| 长梯形截面钢板弯曲成形工艺的数值模拟 |
| The Bending Process Numerical Simulation of Long Trapezoidal Cross-section Steel Sheet |
| 投稿时间：2010-12-08 修订日期：2011-03-10 |
| DOI： |
| 中文关键词: 长梯形截面钢板 弯曲成形 数值模拟 |
| 英文关键词: long trapezoidal cross-section steel sheet bending process numerical simulation |
| 基金项目:“高档数控机床与基础制造装备”科技重大专项（2010ZX04004-113） |
|
| 摘要点击次数: 4157 |
| 全文下载次数: 3192 |
| 中文摘要: |
| 使用Dynaform 5.7软件对长梯形截面钢板弯曲成形的2种工艺方案进行了数值模拟，并对结果进行了分析比较。采用简单V形模具分步冲压工艺得到的工件形状误差较大，而采用整体模具先弯曲中间部位后弯曲两头的成形方案效果较好。 |
| 英文摘要: |
| Two bending process schemes of long trapezoidal cross-section steel sheet were numerically simulated by using Dynaform 5.7 software, and the results of simulation were analyzed. There were large differences between the required product shape and the workpiece shape got by adopting the multistep stamping process with simple V-shape moulds. However, the simulation results with the integral mould, in which the central parts were bended first then the edges, showed that a good workpiece was obtained. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号