石文超,李晓冬,周结魁,等.圆柱斜齿轮精密成形数值模拟与试验研究[J].精密成形工程,2011,3(2):31-33,67.
SHI Wen-chao,LI Xiao-dong,ZHOU Jie-kui,et al.Research on Forging and Demoulding of the Helical Gear[J].Journal of Netshape Forming Engineering,2011,3(2):31-33,67. |
| 圆柱斜齿轮精密成形数值模拟与试验研究 |
| Research on Forging and Demoulding of the Helical Gear |
| 投稿时间：2010-10-12 修订日期：2011-03-10 |
| DOI： |
| 中文关键词: 斜齿轮 数值模拟 脱模 浮动凹模 |
| 英文关键词: heligal gear numerical simulation demoulding floating die |
| 基金项目:国家大学生创新性实验计划项目（091035909） |
|
| 摘要点击次数: 4312 |
| 全文下载次数: 3284 |
| 中文摘要: |
| 基于浮动凹模的思想对圆柱斜齿轮的成形及脱模进行了计算机仿真和石蜡试验研究，分析了成形过程的变形特点及脱模后斜齿轮齿形的应变情况，验证了方案的可行性。结果表明：对圆柱斜齿轮采用浮动凹模成形及脱模的工艺方案，可以获得符合精度要求的锻件。 |
| 英文摘要: |
| Based on the theory of floating die, numerical simulation and experiment are used to study the forming and demoulding of the helical gear, the deformation character and the strain-effective after the demoulding are analyzed, the feasibility of the method is verified. The results show that helical gears with the satisfied dimensional accuracy can be got using the floating die and the demoulding scheme. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号