文章摘要
王艳彬,陈嫚丽,赵志翔.Al-2O-3微粒的尺度律对镁微观组织和拉伸性能的影响[J].精密成形工程,2011,3(2):15-19,30.
WANG Yan-bin,CHEN Man-li,ZHAO Zhi-xiang.Effects on Magnesium Microstructure and Mechanical Properties of the Scaling Laws of Al-2O-3 Micro-particles[J].Journal of Netshape Forming Engineering,2011,3(2):15-19,30.
Al-2O-3微粒的尺度律对镁微观组织和拉伸性能的影响
Effects on Magnesium Microstructure and Mechanical Properties of the Scaling Laws of Al-2O-3 Micro-particles
投稿时间:2010-07-13  修订日期:2011-03-10
DOI:
中文关键词:   强化  微观组织  力学性能  韧性
英文关键词: magnesium  reinforcing  microstructure  mechanical properties  toughness
基金项目:
作者单位
王艳彬 1.国防科技工业精密塑性成形研究应用中心 重庆 4000392.中国兵器工业第五九研究所 重庆 400039 
陈嫚丽 1.国防科技工业精密塑性成形研究应用中心 重庆 4000392.中国兵器工业第五九研究所 重庆 400039 
赵志翔 1.国防科技工业精密塑性成形研究应用中心 重庆 4000392.中国兵器工业第五九研究所 重庆 400039 
摘要点击次数: 4665
全文下载次数: 3278
中文摘要:
      采用混合-压缩-烧结的方法制备了3种不同尺寸且体积分数为1.1%的Al-2O-3微粒增强镁基复合材料。材料微观组织的特征表明:Al-2O-3增强体分布均匀。力学性能特征表明:增强体Al-2O-3微粒的加入显著增加了金属镁的硬度、屈服强度(0.2%)、极限抗拉强度及韧性;与高体积分数SiC微粒增强镁合金AZ91相比,纳米和亚微米尺度的Al-2O-3颗粒增强纯镁的屈服强度(0.2%)、极限抗拉强度和韧性更高。
英文摘要:
      Three kinds of magnesium-matrix composites with different sizes reinforced by 1.1% (volumetric fraction) Al-2O-3 micro-particles were prepared by the mixture-compression-sinter method. The characteristics of the material microstructure show that the reinforcement of Al-2O-3 micro-particles uniformly disperses and the particles bring about a striking reinforcement effect. The mechanical properties show that the hardness, yield strength (0.2%), ultimate tensile strength and toughness of magnesium significantly increase with the Al-2O-3 micro-particles dispersing in the magnesium-matrix composites.Compared with AZ91 magnesium alloy reinforced by SiC micro-particles with a higher volume fraction, the magnesium alloys reinforced by nano-sized and sub-micrometer Al-2O-3 particles offer comparatively higher yield strength(0.2%), ultimate tensile strength and toughness.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第14779383位访问者    渝ICP备15012534号-4

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

    

渝公网安备 50010702501719号