冯文成,姚万贵,邵长斌,等.摆辗机摆头4种运动轨迹的模拟与分析[J].精密成形工程,2011,3(2):1-5,54.
FENG Wen-cheng,YAO Wan-gui,SHAO Chang-bin,et al.Simulation and Analysis of Four Trajectories of Orbital Forming Press Head[J].Journal of Netshape Forming Engineering,2011,3(2):1-5,54. |
| 摆辗机摆头4种运动轨迹的模拟与分析 |
| Simulation and Analysis of Four Trajectories of Orbital Forming Press Head |
| 投稿时间：2010-12-20 修订日期：2011-03-10 |
| DOI： |
| 中文关键词: 摆辗 摆头 运动轨迹 仿真模拟 |
| 英文关键词: orbital forming orbital head trajectory simulation |
| 基金项目: |
|
| 摘要点击次数: 4556 |
| 全文下载次数: 3421 |
| 中文摘要: |
| 针对国外摆辗机摆头4种运动轨迹的运动原理，推导摆头运动方程，用UG NX三维〖JP3〗设计软件建立驱动摆头运动的内、外偏心套结构模型，对摆头运动仿真模拟，理论分析摆头4种运动曲线，验证仿真模拟结果。 |
| 英文摘要: |
| According to movement principle of orbital head three-dimensional design software UG NX is used to build simplified models of the inner and outer eccentric sleeves which drive orbital head movement for four trajectories of foreign orbital forming press head. The orbital head movement is simulated, the equations of orbital head motion are derived, four trajectories from the theoretical aspects are analyzed, the simulation results are verified, the rules of motion are summarized. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501719号