王诗标,唐秉水.冷凝换热器支架冲压缺陷的防治[J].精密成形工程,2011,3(1):70-71,82.
WANG Shi-biao,TANG Bing-shui.Prevention and Cure of Press Fault on Transfer Heat Bracket[J].Journal of Netshape Forming Engineering,2011,3(1):70-71,82. |
| 冷凝换热器支架冲压缺陷的防治 |
| Prevention and Cure of Press Fault on Transfer Heat Bracket |
| 投稿时间：2010-10-18 修订日期：2011-01-10 |
| DOI： |
| 中文关键词: 换热器支架 冲压成形 缺陷 |
| 英文关键词: transfer heat bracket press forming fault |
| 基金项目: |
|
| 摘要点击次数: 4033 |
| 全文下载次数: 3259 |
| 中文摘要: |
| 分析冷凝换热器支架试模过程中出现的产品缺陷，从加大压边力和使产品内应力得到释放这2个工艺因素方面对产品和模具作相应修改，从而得到满足使用要求的零件。 |
| 英文摘要: |
| After analysing the fault of transfer heat bracket in punching forming test the product and die were improved by increasing the pressure-pad-force and setting the inner-stress free. Qualified work pieces were gained. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号