文章摘要
孙健,杨惠,赵兴新,等.滚动轴承钢中残余奥氏体量的测定[J].精密成形工程,2011,3(1):6-9.
SUN Jian,YANG Hui,ZHAO Xing-xin,et al.Content Determination of Retained Austenite in Rolling Bearing Steel[J].Journal of Netshape Forming Engineering,2011,3(1):6-9.
滚动轴承钢中残余奥氏体量的测定
Content Determination of Retained Austenite in Rolling Bearing Steel
投稿时间:2010-11-17  修订日期:2011-01-10
DOI:
中文关键词: 轴承钢  残余奥氏体  阻尼性能
英文关键词: bearing steel  retained austenite  damping property
基金项目:重庆市经委产学研合作技术创新项目(09-CXY-37)
作者单位
孙健 重庆机电职业技术学院 重庆 400050 
杨惠 重庆理工大学 材料科学与工程学院 重庆 400050 
赵兴新 重庆长江轴承股份有限公司 重庆 400039 
寿培根 重庆长江轴承股份有限公司 重庆 400039 
薛雯雯 重庆新材料工程中心, 重庆 400039 
摘要点击次数: 4368
全文下载次数: 3775
中文摘要:
      分别采用磁性法、金相方法和X射线衍射法测量了GCr15轴承钢中的残余奥氏体含量,探讨了残余奥氏体含量对GCr15轴承钢使用寿命的影响。结果表明,磁性法测量GCr15轴承钢中残余奥氏体量快捷、准确,易于实现产品生产中的在线快速检测,轴承钢中残余奥氏体对轴承运行过程中疲劳寿命的影响,必须结合应力形态、分布、运行状态及诱发马氏体转变性能等方向进行综合研究来评价。
英文摘要:
      The retained austenite content in bearing steel GCr15 was determined by magnetism method, metallographic analysis and X-ray diffraction measurement, its effects on the service life of bearing steel GCr15 were also discussed. The results show that magnetism method facilitates the determination of the retained austenite content in bearing steel GCr15 by speediness and accuracy, the effects of the retained austenite content in bearing steel on the fatigue life of the working bearing should be evaluated by comprehensive investigations combining stress form, distribution, running state and the induced martensite transformation characteristics.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第14773343位访问者    渝ICP备15012534号-4

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

    

渝公网安备 50010702501719号