吴金平,伍权,张祥林.衔铁连续冷挤压模具失效分析及工艺改进[J].精密成形工程,2010,2(5):10-12,16.
WU Jin-ping,WU Quan,ZHANG Xiang-lin.Failure Analysis of Die and Process Improvement for Successive Cold Extrusion of Armature Part[J].Journal of Netshape Forming Engineering,2010,2(5):10-12,16. |
| 衔铁连续冷挤压模具失效分析及工艺改进 |
| Failure Analysis of Die and Process Improvement for Successive Cold Extrusion of Armature Part |
| 投稿时间：2010-05-13 修订日期：2010-09-10 |
| DOI： |
| 中文关键词: 衔铁 连续挤压 模具失效 工艺改进 |
| 英文关键词: armature part cold extrusion die failure process improvement |
| 基金项目: |
|
| 摘要点击次数: 3774 |
| 全文下载次数: 3162 |
| 中文摘要: |
| 通过对衔铁连续冷挤压工艺进行试验，对挤压过程中模具失效进行了分析，并提出了合理的工艺改进，对薄壁、非对称零件连续冷挤压工艺设计及试验有参考作用。 |
| 英文摘要: |
| Experiment for successive cold extrusion of armature part has been done. Failure of die is analysed, and process improvement is suggested. It can provide reference for process design and experiment of successive cold extrusion for thin and asymmetric shaped workpiece. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501719号