王向伟.彩色快速成形制件着色误差分析[J].精密成形工程,2010,2(4):27-31,56.
WANG Xiang-wei.Analysis of Color Rapid Prototyping Workpiece Shading Error[J].Journal of Netshape Forming Engineering,2010,2(4):27-31,56. |
| 彩色快速成形制件着色误差分析 |
| Analysis of Color Rapid Prototyping Workpiece Shading Error |
| 投稿时间：2010-03-10 修订日期：2010-07-10 |
| DOI： |
| 中文关键词: 彩色成形 制件 着色 误差 |
| 英文关键词: color molding workpiece coloring error |
| 基金项目:黑龙江省教育厅项目（11511107） |
|
| 摘要点击次数: 3641 |
| 全文下载次数: 2964 |
| 中文摘要: |
| 为了提高快速成形原形均匀着色效果，减小着色误差，通过激光束扫描实验研究，对彩色成形加工过程中产生着色误差的因素进行了分析，对制件平面度误差与树脂表面着色颜料的流动性之间的关系以及加工工艺的影响因素进行了研究，确定出提高着色精度的措施。 |
| 英文摘要: |
| In order to improve the uniform coloring effect and reduce the coloring error of the rapid prototyping workpiece, experiments were carried out by laser beam scanning. The influencing factors of coloring error generated in the color molding process were analyzed. The relation between flatness error and coloring pigment mobility of the resin surface, and factors affecting the process were studied. Measures for improving the coloring accuracy have been obtained. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号