李达,章凯,李萍.铝粉烧结锥形件压扭成形模拟及实验研究[J].精密成形工程,2010,2(4):15-17.
LI Da,ZHANG Kai,LI Ping.Simulation and Experimental Study in HPT Process of Sintered Aluminum Cone[J].Journal of Netshape Forming Engineering,2010,2(4):15-17. |
| 铝粉烧结锥形件压扭成形模拟及实验研究 |
| Simulation and Experimental Study in HPT Process of Sintered Aluminum Cone |
| 投稿时间：2010-05-17 修订日期：2010-07-10 |
| DOI： |
| 中文关键词: 铝粉 锥形件 高压扭转 数值模拟 实验 |
| 英文关键词: aluminium powder cone high-pressure torsion numerical simulation experiment |
| 基金项目:合肥工业大学2009年度大学生创新性实验计划项目（2009CXSY081） |
|
| 摘要点击次数: 3870 |
| 全文下载次数: 3062 |
| 中文摘要: |
| 以铝粉烧结锥形件为研究对象，应用DEFORM软件对其压扭成形过程进行了三维有限元模拟，获得了成形过程中相对密度、等效应变、速度场的分布规律，并在模拟的基础上进行了相关实验研究。结果表明压扭工艺可以成形出近乎致密的铝粉锥形件。 |
| 英文摘要: |
| The FEM simulation in HPT process of sintered aluminum cone was studied with DEFORM, and the distribution of relative density and strain-effective and velocity was obtained. Based on the simulation some related experiment research was conducted. The results show that the nearly compact aluminum cones can be producted by the high-pressure torsion. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号