陈希友.某产品齿轮“蹋齿”问题分析[J].精密成形工程,2010,2(3):74-75.
CHEN Xi-you.Analysis of Deformation of Gear on One Product[J].Journal of Netshape Forming Engineering,2010,2(3):74-75. |
| 某产品齿轮“蹋齿”问题分析 |
| Analysis of Deformation of Gear on One Product |
| 投稿时间：2010-02-13 修订日期：2010-05-10 |
| DOI： |
| 中文关键词: 齿轮 表面渗氮 齿形变形 分析 |
| 英文关键词: gear surface nitriding process deformation of the gear analysis |
| 基金项目: |
|
| 摘要点击次数: 3906 |
| 全文下载次数: 3563 |
| 中文摘要: |
| 通过分析齿轮热处理和表面强化处理工艺后，得出了齿轮出现齿形严重变形（俗称“蹋齿”）的原因是由于采用了表面渗氮工艺，破坏了之前调质的力学性能，导致硬度下降。提出了采用表面高频淬火的表面强化工艺，有效解决了齿轮蹋齿问题。 |
| 英文摘要: |
| By analyzing the techniques of heat treatment and surface peening, the paper concludes that the serious gear deforming (commonly referred as deformation of gear) is due to the use of surface nitriding process which causes the destruction of the mechanical properties based on quenching and tempering and the following hardness decreasing. It puts forward a method to solve the problem by high-frequency surface hardening. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号