王向伟,王扬,马丽心.彩色成形件的力学性能检测[J].精密成形工程,2010,2(3):57-61.
WANG Xiang-wei,WANG Yang,MA Li-xin.Mechanical Property Testing of Color Molded Workpieces[J].Journal of Netshape Forming Engineering,2010,2(3):57-61. |
| 彩色成形件的力学性能检测 |
| Mechanical Property Testing of Color Molded Workpieces |
| 投稿时间：2010-03-08 修订日期：2010-05-10 |
| DOI： |
| 中文关键词: 彩色成形 制作 力学性能 检测 |
| 英文关键词: color molding production mechanical properties testing |
| 基金项目:黑龙江省教育厅项目（11511107） |
|
| 摘要点击次数: 4073 |
| 全文下载次数: 3181 |
| 中文摘要: |
| 为使彩色成形制件具有良好的力学性能，通过设计简易的固化装置制作全彩色的光固化模型，确定彩色制件加工工艺参数，研究着色剂质量分数对制件硬度的影响，并进行相应力学性能的检测。通过实验证明改性颜料对彩色固化有良好的改善效果。 |
| 英文摘要: |
| A simple device to produce full-color light-curing models was designed, which could improve the mechanical property of color molded workpieces. The processing parameters were determined and the influence of the coloring agent on the hardness of workpieces was studied. The mechanical property of the molded workpieces was tested. The experimental results show that the modified color pigments can improve the effect of curing. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号